Schneider Modicon TSX PCX3030 PLC Cable
Schneider Modicon TSXPCX3030
Mobile:+8613959287886
Fax:+8605925610037
Email:chenhe1981@gmail.com
Msn:skywall@yeah.net
Skype:mahone1981
Yahoo!M:yonung1981
Descriptions:
TSXPCX3030 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and PLC devices.
TSXPCX3030 is used for communication between Modicon TSX series PLC and PC with USB port.
TSXPCX3030 supports TSX Premium(57),TSX Micro(37),TSX Nano(07),TSX Naza(08) and Twido.
TSXPCX3030 programming cable contains a Master/Slave switch which is used to select different working mode instead of PLC controlling RS485.Data sending and receiving is switched automatically,so the cable can be used for multi-station and point-to-point communication.
The TER port of TSX series PLC has a DPT signal which is used to distinguish the working mode of the port.If the DPT signal is high level,then the TER port is under Uni-Telway Master mode which is a requirement for PLC programming.If DPT signal is low level,then the TER port working mode is determined by the PLC.